Common Issues Arising In Bathroom Remodels

Bathroom remodels are more work than just some paint and a little bit of tile. If considering a bathroom remodel put the extra time and money into doing a thorough job and completely gutting the bathroom back to square one. This will allow you to uncover issues that have been hidden and deal with them head on. The stuff that has been hidden surprises most homeowners. Thankfully professional bathroom remodeling companies are familiar with what can be uncovered. A complete, flawless bathroom that functions with zero problems will add not only ascetic value to your home but monetary value as well.

Many common issues with bathroom remodeling are due to two causes; one being incompetent workers and two being moisture. If a homeowner is choosing to move forth with bathroom remodeling on their own there are some things to watch for and correct before a project should be continued. Some issues are obvious while others are inconspicuous.

The first issue that can happen is with the framing of the floor. Unfortunately it is common to find floor joists in bathrooms that have been notched by plumbers. This will leave the floor weak. If the subfloor is not strong eventually the new floor will crack under the pressure.

Another issue that can occur is plumbing becomes old and corroded. If this is seen it should be taken care of immediately during the renovation. This will make it easier in the long run. Updating cast iron, galvanized drain lines and copper supply lines can easily be updated when the walls and flooring are torn up.

It seems that those tub surround and bathroom tiles only recently became required to have a waterproof installation. What many bathroom remodeling companies find when tearing apart older bathrooms is that regular dry wall has been put in place behind tub surrounds. If proper waterproofing techniques are not used in bathroom remodeling water vapors will occur causing leaks and deterioration.

With any type of moisture build up comes the nuisance mold. Very few bathrooms are remodeled without the presences of mold. Many reasons can cause this from lack of waterproof material used behind tub surrounds to inefficient ventilation. Daily moisture build up makes bathroom a likely place for mold issue to develop. It is pertinent that proper ventilation is installed in the bathroom remodel.

Another common issue is vents that are hooked up and running yet not properly vented. Vents that are run without proper duct work leading to the outside cause’s huge issues involving mold in attics and/or basement areas. When an inspection is done on a new home or a home that is being purchased this is something all inspectors know to look for. When the bathroom remodel is under way this is usually simple to fix with proper duct work.

The same applies to plumbing fixtures. It is important that homeowners to take the time to determine where the plumbing is all vented and to make sure that it is up to code and properly working. Doing a major bathroom renovation will help homeowner’s spot issues to be resolved and will stop small issues from accumulating into something larger down the road.

Mary J. Gibson

Leave a Reply

Next Post

Truck Bed Mats - Dent Stoppers

Sat May 7 , 2022
Truck bed mats are one answer to protect your trucks from life shortening damage. Pickup trucks were made for hauling. Unless you are very careful though, quickly a shiny new bed can look like a rust bucket. Scratches and scrapes from just casual use will start the rusty trail if […]
Truck Bed Mats – Dent Stoppers

You May Like